add phd templates

phd/1ere.tex

@@ -0,0 +1,73 @@
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%% Front cover – Institut Polytechnique de Paris
+%%% This file is included via \includepdf[pages=1]{1ere.pdf} in the main document.
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+\thispagestyle{empty}
+
+\color{black} \hfill \vfill \tiny \ecodocnum
+\begin{textblock}{5}(0,0)
+	\textblockcolour{black}
+	\includegraphics [scale=0.95]{media/bande.png}
+	\vspace{300mm}
+\end{textblock}
+
+\begin{textblock}{1}(0.6,3)
+	\Large{\rotatebox{90}{\color{white}{\textbf{NNT : \NNT}}}}
+\end{textblock}
+
+\begin{textblock}{1}(\hpostt,\vpostt)
+	\textblockcolour{white}
+	\includegraphics[scale=1]{media/etab/\logoEtt.png} 
+\end{textblock}
+
+\begin{textblock}{1}(\hpos,\vpos)
+	\textblockcolour{white}
+	\includegraphics[scale=1]{media/etab/\logoEt.png}
+\end{textblock}
+
+%% Texte
+\begin{textblock}{10}(5.7,3)
+	\textblockcolour{white}
+	
+	\color{black}
+	\begin{flushright}
+		\huge{\PhDTitle} \bigskip
+		\vfill
+		\color{black}
+		\normalsize {Thèse de doctorat de l'Institut Polytechnique de Paris} \\
+		préparée à \PhDworkingplace \\ \bigskip
+		\vfill
+		École doctorale n$^{\circ}$\ecodocnum ~\ecodoctitle ~(\ecodocacro)  \\
+		
+		\small{Spécialité de doctorat: \PhDspeciality} \bigskip
+		\vfill  
+		\footnotesize{Thèse présentée et soutenue à \defenseplace, le \defensedate, par} \bigskip
+		\vfill
+		\Large{\textbf{\textsc{\PhDname}}}
+		\vfill
+	\end{flushright}
+	
+	\color{black}
+	%% Jury
+	\begin{flushleft}
+		\small Composition du Jury :
+	\end{flushleft}
+
+	\small
+	\newcolumntype{L}[1]{>{\raggedright\let\newline\\\arraybackslash\hspace{0pt}}m{#1}}
+	\newcolumntype{R}[1]{>{\raggedleft\let\newline\\\arraybackslash\hspace{0pt}}lm{#1}}
+	
+	\begin{flushleft}
+	\begin{tabular}{@{} L{9.5cm} R{4.5cm}}
+		\jurynameA  \\ \juryadressA & \juryroleA \\[5pt]
+		\jurynameB  \\ \juryadressB & \juryroleB \\[5pt]
+		\jurynameC  \\ \juryadressC & \juryroleC \\[5pt]
+		\jurynameD  \\ \juryadressD & \juryroleD \\[5pt]
+		\jurynameE  \\ \juryadressE & \juryroleE \\[5pt]
+		\jurynameF  \\ \juryadressF & \juryroleF \\[5pt]
+		\jurynameG  \\ \juryadressG & \juryroleG \\[5pt]
+		\jurynameH  \\ \juryadressH & \juryroleH \\[5pt]
+	\end{tabular} 
+	\end{flushleft}   
+\end{textblock}

phd/4eme.tex

@@ -0,0 +1,86 @@
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%% 4eme.tex — Back cover
+%%% Template for the back cover of theses prepared at 
+%%% the Institut Polytechnique de Paris
+%%% This file is included via \includepdf[pages=1]{4eme.pdf} in the main document.
+%%% Must be compiled first, and compile main after they are treated as independant pdf documents
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%% PLEASE NOTE: this information must fit on a single page
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%Form — Replace the parameters with your information
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+\newcommand{\logoEd}{ed}
+\newcommand{\PhDTitleFR}{titre (en français)}
+\newcommand{\keywordsFR}{3 à 6 mots clés}
+\newcommand{\abstractFR}{\lipsum[1-3]}
+
+\newcommand{\PhDTitleEN}{titre (en anglais)}
+\newcommand{\keywordsEN}{3 à 6 mots clés}
+\newcommand{\abstractEN}{\lipsum[1-3]}
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%% Back cover layout
+%%% DO NOT CHANGE ANYTHING
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\clearpage
+\thispagestyle{empty}
+\newgeometry{left=16mm, top=30mm, right=16mm, bottom=30mm}
+
+%%% Doctoral school logo
+\begin{textblock*}{61mm}(16mm,3mm)
+	\noindent\includegraphics[height=24mm]{media/ed/\logoEd.jpeg}
+\end{textblock*}
+
+%%% Title and summary in French
+\begin{center}
+\fcolorbox{black}{white}{\parbox{0.95\textwidth}{
+{\bf Titre:} \PhDTitleFR 
+\medskip
+
+{\bf Mots clés:} \keywordsFR 
+\vspace{-2mm}
+
+\begin{multicols}{2}
+{\bf Résumé:} 
+\abstractFR 
+\end{multicols}
+}}
+\end{center}
+
+\vspace*{0mm}
+
+%%% Title and summary in English
+\begin{center}
+\fcolorbox{black}{white}{\parbox{0.95\textwidth}{
+{\bf Title:} \PhDTitleEN 
+
+\medskip
+
+{\bf Keywords:} \keywordsEN
+\vspace{-2mm}
+\begin{multicols}{2}
+	
+{\bf Abstract:} 
+\abstractEN
+\end{multicols}
+}}
+\end{center}
+
+%%% IPParis footer
+\begin{textblock*}{161mm}(10mm,270mm)
+\color{black}
+{\bf\noindent Institut Polytechnique de Paris}
+
+\noindent
+\noindent 91120 Palaiseau, France 
+\end{textblock*}
+
+\begin{textblock*}{20mm}(175mm,265mm)
+\includegraphics[width=20mm]{media/IPPARIS-petit}
+\end{textblock*}
+
+\restoregeometry

phd/Read_me.txt

@@ -0,0 +1,118 @@
+================================================================================
+ PhD Thesis LaTeX Template - Institut Polytechnique de Paris
+================================================================================
+
+OVERVIEW
+--------
+This is a LaTeX template for writing a PhD thesis following the formatting
+requirements of Institut Polytechnique de Paris (IP Paris). It includes a
+styled front cover, back cover, chapter formatting, headers, bibliography
+management, and appendix handling.
+
+
+--------------------------------------------------------------------------------
+REPOSITORY STRUCTURE
+--------------------------------------------------------------------------------
+
+├── main.tex                        # Main document – compile this last
+├── 1ere.tex                        # Front cover – compile this first
+├── 4eme.tex                        # Back cover – compile this first
+├── thesisehess.sty                 # Custom style package
+├── biblio.bib                      # Bibliography file
+└── Modele_these_IP_Paris/          # IP Paris cover assets
+    ├── ed/                         # Doctoral school logos
+    ├── etab/                       # Institution logos
+    ├── bande.png                   # IP Paris side band image
+    ├── blank.png                   # Blank placeholder image
+    └── IPPARIS-petit.png           # IP Paris small logo
+
+--------------------------------------------------------------------------------
+FILE DESCRIPTIONS
+--------------------------------------------------------------------------------
+
+1ere.tex - Front Cover
+    Generates the front cover of the thesis following the official IP Paris
+    layout. It sets the black side band, the NNT number, the institution logos,
+    the thesis title, the PhD programme information (doctoral school, speciality,
+    defence date and location), and the jury composition table. It must be
+    compiled separately to produce 1ere.pdf, which is then embedded into
+    main.tex via \includepdf.
+
+4eme.tex - Back Cover
+    Generates the back cover of the thesis. It typically contains the thesis
+    abstract in French and English, keywords, and the institution branding.
+    Like the front cover, it must be compiled separately to produce 4eme.pdf
+    before compiling main.tex.
+
+main.tex - Main Document
+    The central file that assembles the full thesis. It includes, in order:
+    the front cover (1ere.pdf), a blank page, the acknowledgements, table of
+    contents, summaries, general introduction (with its own bibliography), the
+    thesis chapters (each with an abstract, sections, and an appendix), a global
+    bibliography, lists of figures and tables, and the back cover (4eme.pdf).
+    This is the only file you need to compile to produce the complete thesis PDF
+    -- but only after 1ere.tex and 4eme.tex have been compiled first.
+
+thesisehess.sty - Style Package
+    The custom LaTeX style package that controls the overall appearance of the
+    document. It handles:
+
+    - Page layout: A4 format with 2.5 cm margins.
+    - Chapter and section styles: custom fonts and sizes for chapter titles,
+      sections, subsections, and subsubsections.
+    - Headers and footers: two page styles are defined:
+        * plain_center: centered page number at the bottom, chapter title at
+          the top right, with a header rule. Used for the main content.
+        * noheader: centered page number only, no header rule. Used for
+          prefatory pages such as the table of contents and summaries.
+    - Line spacing: 1.5 line spacing throughout.
+    - Hyperlinks: all internal links (table of contents, citations,
+      cross-references) are set to black for a clean print appearance.
+
+
+--------------------------------------------------------------------------------
+COVER PAGE ASSETS
+--------------------------------------------------------------------------------
+
+The images and graphics used for the front and back covers are provided by
+IP Paris in the official thesis cover template:
+
+    "Modele de these IP Paris"
+
+You can download the official template from the IP Paris doctoral school
+resources. Place the required images in the Modele_these_IP_Paris/ folder
+as expected by 1ere.tex and 4eme.tex.
+
+
+--------------------------------------------------------------------------------
+!! IMPORTANT: COMPILATION ORDER
+--------------------------------------------------------------------------------
+
+You must compile the cover files before compiling the main document.
+
+The front and back covers are included in main.tex as pre-compiled PDFs using
+\includepdf. This means that any changes made to 1ere.tex or 4eme.tex will NOT
+appear in the final document unless you recompile them first.
+
+Compilation order:
+
+    Step 1 - Compile 1ere.tex  -->  generates 1ere.pdf
+    Step 2 - Compile 4eme.tex  -->  generates 4eme.pdf
+    Step 3 - Compile main.tex  -->  generates the full thesis
+
+NOTE: If you update your name, title, jury members, or any other information
+in the cover files, remember to recompile 1ere.tex and/or 4eme.tex before
+recompiling main.tex, otherwise the changes will not be reflected.
+
+
+--------------------------------------------------------------------------------
+GETTING STARTED
+--------------------------------------------------------------------------------
+
+    1. Fill in your personal information (name, thesis title, jury, etc.)
+       in 1ere.tex and 4eme.tex.
+    2. Follow the compilation order above.
+    3. Replace all \blindtext placeholders in main.tex with your actual content.
+    4. Add \markboth{Section Title}{Section Title} at the start of each chapter,
+       section, and subsection to control the page header text.
+

phd/main.tex

@@ -0,0 +1,245 @@
+%%% DOCUMENT EXPLANATION:
+%%% Remove: \blindtext
+%%% Add at each chapter, section, and subsection start to set what is written in the page header: \markboth{Chapter Title}{Chapter Title}
+
+\documentclass{book}
+\usepackage{thesisehess}
+\usepackage{pdfpages} 
+
+
+\begin{document}
+
+
+%%% Front cover IPParis %%%
+%%% PLEASE: Compile 1ere.tex first!!!!!
+\includepdf[pages=1]{1ere.pdf}
+
+% Blank page for page 2:
+\thispagestyle{empty} 
+
+
+% Acknowledgments
+\chapter*{Acknowledgments - Remerciements}
+\pagestyle{noheader} 
+\blindtext
+
+
+% Table of Contents
+
+\tableofcontents
+\pagestyle{noheader} 
+
+% Summary [ENGLISH AND French]
+\chapter*{Summary}
+\pagestyle{noheader} 
+\blindtext
+
+\chapter*{Résumé}
+\pagestyle{noheader} 
+\blindtext
+
+
+% General Introduction
+
+\begin{bibunit}[chicago] % Set general introduction bibliography start (take into account only references \cite in between \bengin{bibunit} et \end{bibunit}
+
+% General Introduction
+\chapter*{General Introduction}
+\markboth{General Introduction}{General Introduction}
+\pagestyle{plain_center} 
+\blindtext
+
+
+% Introduction générale (translation)
+\chapter*{Introduction générale}
+\markboth{Introduction générale}{Introduction générale}
+\blindtext
+
+% Bibliography General Introduction
+\newpage
+\singlespacing
+\renewcommand{\bibname}{Bibliography General Introduction}
+\putbib[biblio]
+\end{bibunit}
+
+
+% Chapter 1
+\chapter{Chapter Title}
+\markboth{Chapter Title}{Chapter Title}
+\pagestyle{plain_center} 
+
+\newpage
+% Abstract Chapter 1
+\section*{Abstract}
+\markboth{Abstract}{Abstract}
+
+\newpage
+%  Chapter 1 Section1
+\section{Titre de niveau 1}
+\blindtext
+
+%  Chapter 1 Subsection1
+\subsection{Titre de niveau 1.1}
+\markboth{Titre de niveau 1.1}{Titre de niveau 1.1}
+\blindtext
+
+%  Chapter 1 Subsubsection1
+\subsection{Titre de niveau 1.1.1}
+\markboth{Titre de niveau 1.1.1}{Titre de niveau 1.1.1}
+\blindtext
+
+%  Appendix chapter 1
+\newpage
+\section*{Appendix To Chapter 1}
+\markboth{Appendix To Chapter 1}{Appendix To Chapter 1}
+
+%%%%%%%%%%%%%%%% Settings Appendix %%%%%%%%%%%%%%%
+% Set table and figure numbering to 0
+% Add letter prefix to table and figure names
+\setcounter{table}{0}
+\renewcommand{\thetable}{A\arabic{table}}
+\setcounter{figure}{0}
+\renewcommand{\thefigure}{A\arabic{figure}}
+\setcounter{section}{0}
+\renewcommand{\thesection}{A\arabic{section}}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+\section{Appendix 1}
+\section{Appendix 2}
+
+%%%%%%%%%%%%%%%% Transition between Chapters %%%%%%%%%%%%%%%
+% Reset table and figure numbering to 0
+% Remove letter prefix from table and figure names
+\setcounter{table}{0}
+\renewcommand{\thetable}{A\arabic{table}}
+\setcounter{figure}{0}
+\renewcommand{\thefigure}{A\arabic{figure}}
+\setcounter{section}{0}
+\renewcommand{\thesection}{A\arabic{section}}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+
+% Chapter 2
+\chapter{Chapter Title 2}
+\markboth{Chapter Title 2}{Chapter Title 2}
+
+\newpage
+
+% Abstract Chapter 2
+\section*{Abstract}
+\markboth{Abstract}{Abstract}
+\blindtext
+\newpage
+
+% Chapter 2: Section 1
+\section{Titre de niveau 1}
+\markboth{Titre de niveau 1}{Titre de niveau 1}
+\blindtext
+
+% Chapter 2: Subsection 1
+\subsection{Titre de niveau 1.1}
+\markboth{Titre de niveau 1.1}{Titre de niveau 1.1}
+\blindtext
+
+% Chapter 2: Subsubsection 1
+\subsubsection{Titre de niveau 1.1.1}
+\markboth{Titre de niveau 1.1.1}{Titre de niveau 1.1.1}
+\blindtext
+
+%  Appendix chapter 2
+\newpage
+\section*{Appendix To Chapter 2}
+\markboth{Appendix To Chapter 2}{Appendix To Chapter 2}
+
+%%%%%%%%%%%%%%%% Settings Abstract %%%%%%%%%%%%%%%
+% Set tables and figure numerotation to 0
+% Integrate letter to Tables and Figures name
+\setcounter{table}{0}
+\renewcommand{\thetable}{A\arabic{table}}
+\setcounter{figure}{0}
+\renewcommand{\thefigure}{A\arabic{figure}}
+\setcounter{section}{0}
+\renewcommand{\thesection}{A\arabic{section}}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+\section{Appendix 1}
+\section{Appendix 2}
+
+%%%%%%%%%%%%%%%% Transition between Chapters %%%%%%%%%%%%%%%
+% Reset table and figure numbering to 0
+% Remove letter prefix from table and figure names
+\setcounter{table}{0}
+\renewcommand{\thetable}{A\arabic{table}}
+\setcounter{figure}{0}
+\renewcommand{\thefigure}{A\arabic{figure}}
+\setcounter{section}{0}
+\renewcommand{\thesection}{A\arabic{section}}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% Chapter 3
+\chapter{Chapter Title 3}
+\markboth{Chapter Title 3}{Chapter Title 3}
+
+\newpage
+% Abstract : Chapter 3
+\section*{Abstract}
+\markboth{Abstract}{Abstract}
+\blindtext
+\newpage
+
+% Chapter 3: section 1
+\section{Titre de niveau 1}
+\markboth{Titre de niveau 1}{Titre de niveau 1}
+\blindtext
+
+% Chapter 3: subsection 1
+\subsection{Titre de niveau 1.1}
+\markboth{Titre de niveau 1.1}{Titre de niveau 1.1}
+\blindtext
+
+% Chapter 3: subsubsection 1
+\subsection{Titre de niveau 1.1.1}
+\markboth{Titre de niveau 1.1.1}{Titre de niveau 1.1.1}
+\blindtext
+
+% Appendix Chapter 3
+\newpage
+\section*{Appendix To Chapter 3}
+\markboth{Appendix To Chapter 3}{Appendix To Chapter 3}
+
+%%%%%%%%%%%%%%%% Settings Abstract %%%%%%%%%%%%%%%
+% Set tables and figure numerotation to 0
+% Integrate letter to Tables and Figures name
+\setcounter{table}{0}
+\renewcommand{\thetable}{A\arabic{table}}
+\setcounter{figure}{0}
+\renewcommand{\thefigure}{A\arabic{figure}}
+\setcounter{section}{0}
+\renewcommand{\thesection}{A\arabic{section}}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+\section{Appendix 1}
+\section{Appendix 2}
+
+
+% Bibliography for all papers
+\newpage
+
+\chapter*{Bibliography}
+\markboth{Bibliography}{Bibliography}
+\singlespacing
+\bibliographystyle{chicago}
+\bibliography{biblio}
+
+% List of figures
+\listoffigures
+
+% List of tables
+\listoftables
+
+
+%%% Back cover IPParis %%%
+%%% First compile 4eme.tex separately, then include the resulting PDF:
+\includepdf[pages=1]{4eme.pdf}
+
+\end{document}

phd/thesisehess.sty

@@ -0,0 +1,65 @@
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesPackage{thesisehess}
+% Required Packages
+\RequirePackage[utf8]{inputenc}
+\RequirePackage[T1]{fontenc}
+\RequirePackage{fix-cm}
+\RequirePackage[english]{babel}
+\RequirePackage{graphicx}
+\RequirePackage{geometry}
+\RequirePackage{xcolor}
+\RequirePackage{titling}
+\RequirePackage{titlesec}
+\RequirePackage{fancyhdr}
+\RequirePackage{tikz}
+\usetikzlibrary{calc}
+\RequirePackage{caption}
+\RequirePackage{lipsum}  
+\RequirePackage{blindtext}
+\RequirePackage[hidelinks]{hyperref}
+\RequirePackage{bibunits}
+\RequirePackage{afterpage}
+% Page layout settings
+\geometry{a4paper, margin=2.5cm}
+\hypersetup{
+  linkcolor=black,
+  citecolor=black,
+  filecolor=black,
+  urlcolor=black,
+  linktoc=all
+}
+% Chapter title page style – separate page with: "Chapter" and number (top left) and chapter title
+\titleformat{\chapter}[display]
+  {\huge\bfseries} % Size of "Chapter" label
+  {\chaptertitlename\ \thechapter} % "Chapter" label and chapter number
+  {20pt} % Space between chapter label and chapter title
+  {\Huge\raggedright} % Size of chapter title
+  
+% Section styles
+\titleformat{\section}
+  {\normalfont\huge\bfseries}{\thesection}{1em}{}
+\titleformat{\subsection}
+  {\normalfont\Large\bfseries}{\thesubsection}{1em}{}
+\titleformat{\subsubsection}
+  {\normalfont\large\bfseries}{\thesubsubsection}{1em}{}
+% Headers and centered page numbers
+\usepackage{fancyhdr}
+\fancypagestyle{plain_center}{
+  \fancyhf{}
+  \fancyfoot[C]{\thepage}
+  \renewcommand{\headrulewidth}{0.8pt} % Set header rule line width
+  \fancyhead[R]{\nouppercase{\rightmark}} % Set header with chapter title at the top right
+}
+\pagestyle{plain_center} % Add both headers and page numbers
+\fancypagestyle{noheader}{
+  \fancyhf{}
+  \fancyfoot[C]{\thepage}
+  \renewcommand{\headrulewidth}{0pt}
+}
+% Spacing adjustments
+\setlength{\headheight}{14.61858pt} % Fixes fancyhdr warning about headheight being too small
+\addtolength{\topmargin}{-2.61858pt} % Compensates for the increased headheight to keep the text area unchanged
+% Line spacing 1.5
+\usepackage{setspace} 
+\setstretch{1.5}
+\endinput